From OpenWiz
lrwxrwxrwx 1 17 2008-02-19 22:52 auto_wnet -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 eepromtest -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 fastunzip -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 flash_eraseall -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 flash_update -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 flash_write -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 iwconfig -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 iwlist -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 iwpriv -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 mount.cifs -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 setgpio -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 setuartgpio -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 sil9030test -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 sys_up -> /flash/bin/rompkg
lrwxrwxrwx 1 17 2008-02-19 22:52 testtest -> /flash/bin/rompkg
$ strings rompkg
bFLT
gfff
% DR
(\@KL
DDp@-
D0@-
T<cS
TP0@-
}hp@-
bB?
@ #!
@ c!
\Wgfff
gfff
@ c!
flash_eraseall
flash_write
flash_update
iwconfig
iwlist
iwpriv
auto_wnet
mount.cifs
sys_up
setgpio
setuartgpio
sil9030test
eepromtest
fastunzip
%s: NET kernel socket error
%s: memory allocation failed
%-8.16s no frequency information.
%-8.16s Interface doesn't support scanning.
Error for wireless request "%s" (%X) :
Set Frequency
SET failed on device %-1.16s ; %s.
%-8.16s Interface doesn't support scanning : %s
Unhandled signal - exiting...
%s: Allocation failed
iwcubeon_scan_ap
%-8.16s No scan results
IW_ESSID=%s
IW_AP=%s
IW_QUALITY=%d/%d
IW_CHANNEL=%d
IW_WEPMODE=open
IW_WEPMODE=restricted
IW_KEY=%s
IW_RATE=auto
IW_RATE=%g%c
IW_AP_RATES=
%g%c
IW_ESSID
IW_WEPMODE
restricted
open
IW_KEY
IW_MODE
Ad-hoc
IW_WIRELESS_STANDARD
IW_RATE
auto
%s:%s:unknown scaler %c
iwcubeon_parse_line
IW_CHANNEL
%s:%s: unknown parameter : %s=%s
/etc/config/network/wireless.pre.conf
----
essid: %s
channel: %d
security: %s
%s %s
rate:
%g%c
%Lu%Lu%u%u%u%u%u%u%Lu%Lu%u%u%u%u%u%u
%Lu%Lu%u%u%u%u%n%n%Lu%Lu%u%u%u%u%u
%n%Lu%u%u%u%u%n%n%n%Lu%u%u%u%u%u
compressed
bytes
/proc/net/dev
Warning: cannot open %s.
e:s:
unknown option %c
*************** scan trial %d
auto_wnet: iwcubeon_scan_ap : returned %d
choosing non-encrypted network
no usable wireless network found
iwconfig
mode
Managed
channel
essid
restricted
open
rate
auto
iwconfig %s rate %s
iwpriv
authmode
iwpriv %s authmode 2
tMonitor
Secondary
Repeater
Master
Managed
Ad-Hoc
Auto
/proc/net/dev
Cannot parse /proc/net/dev
SIOCGIFCONF: %s
/proc/net/wireless
Cannot read /proc/net/wireless
| WE
| Missed
Cannot parse /proc/net/wireless
%-8.16s Driver has no Wireless Extension version information.
%-8.16s Recommend Wireless Extension v%d or later,
Currently compiled with Wireless Extension v%d.
%-8.16s Wireless Extension version too old.
socket
%-8.16s Wireless-Tools version %d
Compatible with Wireless Extension v11 to v%d.
Kernel Currently compiled with Wireless Extension v%d.
Warning: Driver for device %s has been compiled with an ancient version
of Wireless Extension, while this program support version 11 and later.
Some things may be broken...
Warning: Driver for device %s has been compiled with version %d
of Wireless Extension, while this program supports up to version %d.
Warning: Driver for device %s recommend version %d of Wireless Extension,
but has been compiled with version %d, therefore some driver features
may not be available...
%s: Allocation failed
iw_get_priv_info
SIOCSIWMODE: %s
SIOCSIWFREQ: %s
SIOCSIWENCODE(%d): %s
SIOCSIWNWID: %s
SIOCSIWESSID: %s
IEEE 802.11
%g %cHz
Channel%c%s
Frequency%c%s (Channel %d)
Frequency%c%s
%g %cb/s
%d dBm
Quality%c%d/%d
Signal level%c%d dBm
Noise level%c%d dBm
Signal level%c%d/%d
Noise level%c%d/%d
Quality:%d Signal level:%d Noise level:%d
<too big>
%.2X
Error: Passphrase not implemented
Malloc failed (string too long ?)
-:;.,
%1X%1X
Error: Invalid login format
flags = %X, index = %X
min
max
timeout:
period:
%gms
%dus
mode:Unicast only received
mode:Multicast only received
mode:All packets received
mode:Force sending
mode:Repeat multicasts
lifetime:
limit:%d
%02d:%02d:%02d.%06u
Interface %s doesn't support MAC addresses
Interface %s doesn't support IP addresses
%02X:%02X:%02X:%02X:%02X:%02X
default
%-8.16s Interface doesn't support IP addresses
Invalid interface address %s
Arp failed for %s on %s... (%d)
Try to ping the address before setting it.
%-8.16s Interface doesn't support MAC addresses
Invalid hardware address %s
Usage: iwconfig interface [essid {NN|on|off}]
[nwid {NN|on|off}]
[mode {managed|ad-hoc|...}
[freq N.NNNN[k|M|G]]
[channel N]
[ap {N|off|auto}]
[sens N]
[nick N]
[rate {N|auto|fixed}]
[rts {N|auto|fixed|off}]
[frag {N|auto|fixed|off}]
[enc {NNNN-NNNN|off}]
[power {period N|timeout N}]
[txpower N {mW|dBm}]
[commit]
Check man pages for more details.
%-8.16s %s
ESSID:"%s" [%d]
ESSID:"%s"
ESSID:off/any
Nickname:"%s"
NWID:off/any
NWID:%X
Mode:%s
%s
Cell:
Access Point:
%s
Bit Rate%c%s
Tx-Power%c%s
Sensitivity=
Sensitivity:
%d dBm
%d/%d
%d
Retry
:off
RTS thr:off
RTS thr=
RTS thr:
%d B
Fragment thr:off
Fragment thr=
Fragment thr:
Encryption key:
[%d]
Security mode:restricted
Security mode:open
Power Management
:off
Link %s
Rx invalid nwid:%d Rx invalid crypt:%d Rx invalid frag:%d
Tx excessive retries:%d Invalid misc:%d Missed beacon:%d
Rx invalid nwid:%d invalid crypt:%d invalid misc:%d
%-8.16s no wireless extensions.
%-8.16s %s
Error : too few arguments.
commit
Error for wireless request "%s" (%X) :
Commit changes
SET failed on device %-1.16s ; %s.
nwid
domain
Set NWID
too few arguments.
GET failed on device %-1.16s ; %s.
invalid argument "%s".
freq
channel
Set Frequency
auto
fixed
Set Bit Rate
sens
Set Sensitivity
Set Encode
[%i]
open
restricted
temporary
essid
Set ESSID
argument too big (max %d)
Set AP Address
nick
Set Nickname
rate
Set RTS Threshold
frag
Set Fragmentation Threshold
mode
Set Mode
power
Set Power Management
period
timeout
unicast
multicast
force
repeat
txpower
Set Tx Power
retry
Set Retry Limit
limit
lifetime
Error : unrecognised wireless request "%s"
--help
--version
iwconfig
addr
float
int
char
byte
Usage: iwpriv interface [private-command [private-arguments]]
interface [roam {on|off}]
interface [port {ad-hoc|managed|N}]
[%i]
Invalid command : %s
Invalid private ioctl definition for : %s
Invalid float [%s]...
Invalid address [%s]...
Not yet implemented...
The command %s need exactly %d argument...
Interface doesn't accept private ioctl...
%s (%X): %s
%-8.16s %s:
%d
%gG
%gM
%gk
%.*s
%-8.16s no private ioctls.
%-8.16s Available private ioctl :
%-16.16s (%.4X) : set %3d %s & get %3d %s
%-8.16s Available read-only private ioctl :
setroam
This device doesn't support roaming
%-8.16s enable roaming
%-8.16s disable roaming
Roaming support is broken.
invalid
managed (BSS)
reserved
ad-hoc
Lgport_type
get_port
This device doesn't support getting port type
Port type support is broken.
%-8.16s Current port mode is %s <port type is %d>.
sport_type
set_port
This device doesn't support setting port type
Invalid port type (or setting not allowed)
socket
--all
--help
--version
iwpriv
roam
port
%-8.16s no frequency information.
%-8.16s %d channels in total; available frequencies :
Channel %.2d : %s
%-8.16s %d channels
Current %s
%-8.16s Interface doesn't have a list of Peers/Access-Points
%-8.16s Interface doesn't support MAC addresses
%-8.16s No Peers/Access-Point in range
%-8.16s Peers/Access-Points in range:
%s :
%s
%-8.16s no bit-rate information.
%-8.16s %d available bit-rates :
%s
%-8.16s unknown bit-rate information.
Current Bit Rate%c%s
%-8.16s no encryption keys information.
%-8.16s
%d key sizes : %d
, %d
bits
%d keys available :
SIOCGIWENCODE: %s
[%d]: off
[%d]: %s
(%d bits)
Current Transmit Key: [%d]
Security mode:restricted
Security mode:open
%s
%-8.16s no power management information.
Supported modes :
o Receive all packets (unicast & multicast)
o Receive Unicast only (discard multicast)
o Receive Multicast only (discard unicast)
o Force sending using Power Management
o Repeat multicast
Auto period ;
Fixed period ;
Auto timeout ;
Fixed timeout ;
Current mode:off
Current %s
mode:on
%-8.16s no transmit-power information.
%-8.16s unknown transmit-power information.
%-8.16s %d available transmit-powers :
%d (no units)
%d dBm (%d mW)
Current Tx-Power
:off
%d dBm (%d mW)
%-8.16s no retry limit/lifetime information.
Auto limit ;
Fixed limit ;
Auto lifetime ;
Fixed lifetime ;
Current mode:on
Cell %02d - Address: %s
NWID:off/any
NWID:%X
%s
Mode:%s
Protocol:%-1.16s
ESSID:"%s" [%d]
ESSID:"%s"
ESSID:off/any
Encryption key:
[%d]
Security mode:restricted
Security mode:open
Bit Rate:%s
Extra:%s
(Unknown Wireless Token 0x%04X)
%-8.16s Interface doesn't support scanning.
%-8.16s Interface doesn't support scanning : %s
Unhandled signal - exiting...
%s: Allocation failed
print_scanning_info
%-8.16s Failed to read scan data : %s
%-8.16s Scan completed :
%-8.16s No scan results
Set Encoding (kernel generated)
New bit-rate
New ESSID
Set ESSID (kernel generated)
Scan request completed
New Access Point/Cell address - roaming
Spy threshold crossed
Set Mode (kernel generated)
New Frequency/Channel
Set Frequency/Channel (kernel generated)
Set NWID (kernel generated)
Expired node
Registered node
Custom driver event
Tx packet dropped - retry exceeded
%-8.16s no wireless event capability information.
%-8.16s Wireless Events supported :
0x%04X : %s
event
peers
accesspoints
retry
txpower
power
encryption
rate
bitrate
channel
frequency
scanning
iwlist: unknown command `%s'
iwlist: command `%s' is ambiguous
Usage: iwlist [interface] %s
[interface] %s
--help
--version
iwlist
iwlist: command `%s' needs more arguments
iwlist: command `%s' needs fewer arguments
socket
Usage: %s <remotetarget> <dir> -o <options>
Mount the remote target, specified as a UNC name,
to a local directory.
Options:
user=<arg>
pass=<arg>
dom=<arg>
Less commonly used options:
credentials=<filename>,guest,perm,noperm,setuids,nosetuids,
rw,ro,sep=<char>,iocharset=<codepage>,suid,nosuid,exec,noexec
Options not needed for servers supporting CIFS Unix extensions (e.g. most Samba versions):
uid=<uid>,gid=<gid>,dir_mode=<mode>,file_mode=<mode>
Rarely used options:
port=<tcpport>,rsize=<size>,wsize=<size>,unc=<unc_name>,ip=<ip_address>,dev,nodev
Options are described in more detail in the manual page
man 8 mount.cifs
To display the version number of the mount helper:
%s -V
Mounting cifs URL not implemented yet. Attempt to mount %s
username
mount.cifs failed due to malformed username in credentials file
password
mount.cifs failed: password in credentials file too long
mount.cifs failed. %s attempting to open password file %s
mount.cifs failed. Error %s reading password file
Warning: null password used since cifs password file empty
Warning: password longer than 64 characters specified in cifs password file
parsing options: %s
user
skipping empty user mount parameter
username specified with no parameter
mount.cifs warning - password specified twice
username too long
pass
password specified twice, ignoring second
password too long
target ip address argument missing
ip address %s override specified
ip address too long
target
path
invalid path to network resource
UNC name too short
unc name specified twice, ignoring second
UNC Path does not begin with // or \\
CIFS: UNC name too long
domain
workgroup
CIFS: invalid domain name
domain name too long
cred
error %d opening credential file %s
invalid credential file name specified
file_mode
fmask
Option '%s' requires a numerical argument
WARNING: '%s' not expressed in octal.
WARNING: CIFS mount option 'fmask' is deprecated. Use 'file_mode' instead.
dir_mode
dmask
WARNING: CIFS mount option 'dmask' is deprecated. Use 'dir_mode' instead.
nosuid
suid
nodev
noexec
exec
guest
mount error: UNC name too long
cifs://
smb://
Mounting the DFS root for domain not implemented yet
mount error: improperly formatted UNC name.
%s does not begin with \\ or //
ip address specified explicitly
mount error: could not find target server. TCP name %s not found
mount error: could not get valid ip address for target server
Mounting the DFS root for a particular server not implemented yet
port
credentials
wsize
rsize
type
options
read-write
version
verbose
read-only
bind
move
help
mount.cifs
afFhilL:no:O:rsSU:vVwt:
mount.cifs version: %s.%s%s
unknown mount option %c
PASSWD
PASSWD_FD
PASSWD_FILE
No ip address specified and hostname not found
mount error: can not change directory into mount target %s
mount error: mount point %s does not exist
mount error: mount point %s is not a directory
mount error: permission denied or not superuser and mount.cifs not installed SUID
Password:
Could not allocate memory for mount options
unc=
,ip=
,user=
,pass=
,ver=
mount.cifs kernel mount options %s
cifs
mount failed but no error number set
mount error: cifs filesystem not supported by the system
mount error %d = %s
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
/etc/mtab
,mand
,nomand
,noexec
,nosuid
,nodev
,synch
could not update mount table
SIOCSIFADDR
SIOCSIFNETMASK
SIOCSIFBRDADDR
Error retrieving wireless interface name
RT2500 Wireless
RT61 Wireless
%s is not supported for now...
Detected %s
%s: %s: %s
%s: %s: unable to get MTD device info
Erasing %d Kibyte @ %x -- %2lu %% complete.
E%d/%lu
%s: %s: MTD Erase failure: %s
verbose
help
%s: printing human readable progress messages
%s: no MTD device specified
Try `%s --help' for more information.
Usage: %s [OPTION] MTD_DEVICE
Erases all of the specified MTD device.
-j, --jffs2 format the device for jffs2
-v, --verbose human readable progress messages
--help display this help and exit
--version output version information and exit
Unable to read all data
Read error
W%u/%u
%s: %s: %s
%s: %s: unable to get MTD device info
%s: %s : too big to fit in flash
flash_erase
%s: error while erasing flash
%s: %s
mtd writing failed
version
help
%s: no MTD device specified
Try `%s --help' for more information.
Usage: %s [OPTION] MTD_DEVICE ROM_IMAGE_FILE
Erases all of the specified MTD device.
--help display this help and exit
--version output version information and exit
flash_write 0.1.0
Copyright (C) 2005 CubeOn Inc.
usage: %s [mtd device] [romfs file]
flash_write
reboot
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>> Dump of Block %p
%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x
>>> Baseblock change detected at %s(%d)
localrc
telnetd
networking
boot
sys_up.c
bntr
sys_up: -b : specifies this instance is for boot
-n : do network setups (-b does networking by default)
-t : runs telnetd
-r : runs rc.local script
dpx1
/usr/sbin/telnetd
/etc/config/rc.local
/bin/sh
/tmp
ramfs
/proc/bus/usb
usbfs
/proc
proc
sys_up: mount failed : file [%s], dest dir [%s], type [%s], errcode [%d]
tweaked bb_show_usage
255.0.0.0
127.0.0.1
/etc/config/network/
eth0
wireless
wired
DEFAULT_GW
DEFAULT_GW_DEV
sys_up : parsing %s
IF_ENABLE
ISWIRELESS
ADDRESSTYPE
dhcp
ADDRESS
NETMASK
%s: All network interfaces are activated temporarily.
global
%s: error while parsing global network configuration.
%s: error while parsing network configuration file for %s
!!!!!!! SYS_UP : SYS_UP_MAX_IFNUM is too small?
sys_up : link status off (%s)
sys_up : netutil_get_linkstatus(%s) returned "%s"
sys_up : link status off (%s)... skipping...
sys_up : activating %s
calling minidhcp()
minidhcp
%s%c
could not open input file
/usr/share/udhcpc/default.script
eth0
%s%d.%d.%d.%d
deconfig
0.0.0.0
renew
bound
/etc/resolv.conf
search %s
nameserver %s
minidhcp: failed to open %s
Performing a DHCP renew
Unicasting a release of %s to %s
Entering released dhcpc_state
version
script
request
quit
pidfile
interface
hostname
background
foreground
clientid
c:fbH:h:i:np:qr:s:v
udhcpcd, version %s
0.9.9-pre
udhcpc
FATAL: couldn't listen on socket, %m
leasefail
No lease, forking to background.
No lease, failing.
Lease lost, entering init dhcpc_state
No lease time with ACK, using 1 hour lease
Lease of %s obtained, lease time %ld
Received DHCP NAK
Received SIGTERM
setgpio <gpio #(0~15)> <direction 0:read 1:write> [status 0/1 (write only] [-q:quiet (readonly)]
At least 2 args needed
GPIO must be 0<=gpio<=15
Direction must be 0(read) or 1(write)
if writing, 3rd argument must be given.
if writing, gpio status must be 0(low) or 1(high)
arg 1 : gpio %ld
arg 2 : direction %d
arg 3 : status %d
GPIO %d direction Write, status %s
HIGH
GPIO %d direction Read, status %s
setuartgpio [uart 0/1] [gpio #(0~6)] [direction 0:read 1:write] [status 0/1 (write only].
gpio 0 and 4 are used by UART data lines. be careful.
At least 4 args needed
UART must be 0 or 1
arg 1 : uart %d
GPIO must be 0<=gpio<=6
arg 2 : gpio %d
arg 3 : direction %d
if writing, 4th argument must be given.
arg 4 : status %d
%s : TIMEOUT waiting for ACK
I2C_WaitAck
eepromtest [--dump | --to <filename> | --from <filename> | --help]
eeprom read error (sequential read from 0)
= dumping data read
%02X
---------------------------
= random read test =
eeprom read error (ramdom read at 0x%02X)
= sequential read test =
= sequential read test : SUCCESSFUL =
= random write test =
eeprom write error (ramdom write at 0x%02X)
eeprom random write verification failed
= dumping original data written
= dumping read data
= random write test : SUCCESSFUL =
= page write test =
eeprom write error (page write at 0x%02X)
eeprom page write verification failed
= page write test : SUCCESSFUL =
creat error (%d)
write error (%d)
read error (%d)
--to
--from
--help
--dump
I2C error at 0x%02X
Invalid vendor ID detected at 0x%02X
SIL9030 found at 0x%02X
[%llu:%s:%ld]
my_inflate : buffer full (0x%08x)
Inflating....
Outcnt = 0x%08x(%d)
Final Inptr = 0x%08x(%d)
Original CRC = 0x%08lx
Computed CRC = 0x%08lx
Ckecksum mismatched!!
%s "in file" "out file"
%s: opening %s : %s
%s: reading %s : %s
%s: failed
%s: writing %s : %s
%s: %s : error writing, after %u
cubeon_append_fp_to_fp
%s: %s : error reading, after %u
%s: %s : error opening source file %s
cubeon_append_file_to_fp
%s: %s : error seeking, %s
%s: failed to exec %s : %s
%s: %s failed with exit status %d
/dev/null
fork
debug
info
error
warning
critical!
ALERT!
EMERGENCY!
%s,
%s (v%s) started
0.9.9-pre
bogus packet, option fields too long.
Option 0x%02x did not fit into the packet!
MSFT 98
received bogus message, ignoring
Unable to open pidfile %s: %m
SIOCGIFADDR failed, is the interface up and configured?: %m
SIOCGIFINDEX failed!: %m
SIOCGIFHWADDR failed!: %m
socket failed!: %m
/dev/urandom
Could not load seed from /dev/urandom: %m
udhcp 0.9.9-pre
Sending discover...
Sending select for %s...
Sending renew...
Sending release...
received bogus message (bad magic) -- ignoring
%s:
%s%s
/dev/null
Write Error
V(memory exhausted
0.9.26
*** __pthread_find_self ERROR descriptor is NULL!!!!! ***
pt: assertion failed in %s:%i.
manager.c
%s %s %s %s %d %d
%s%s%s
(nil)
(null)
npxXoudifFeEgGaACSncs[
hlLjztq
(nil)
nfinity
Unknown error Success
Operation not permitted
No such file or directory
No such process
Interrupted system call
Input/output error
No such device or address
Argument list too long
Exec format error
Bad file descriptor
No child processes
Resource temporarily unavailable
Cannot allocate memory
Permission denied
Bad address
Block device required
Device or resource busy
File exists
Invalid cross-device link
No such device
Not a directory
Is a directory
Invalid argument
Too many open files in system
Too many open files
Inappropriate ioctl for device
Text file busy
File too large
No space left on device
Illegal seek
Read-only file system
Too many links
Broken pipe
Numerical argument out of domain
Numerical result out of range
Resource deadlock avoided
File name too long
No locks available
Function not implemented
Directory not empty
Too many levels of symbolic links
No message of desired type
Identifier removed
Channel number out of range
Level 2 not synchronized
Level 3 halted
Level 3 reset
Link number out of range
Protocol driver not attached
No CSI structure available
Level 2 halted
Invalid exchange
Invalid request descriptor
Exchange full
No anode
Invalid request code
Invalid slot
Bad font file format
Device not a stream
No data available
Timer expired
Out of streams resources
Machine is not on the network
Package not installed
Object is remote
Link has been severed
Advertise error
Srmount error
Communication error on send
Protocol error
Multihop attempted
RFS specific error
Bad message
Value too large for defined data type
Name not unique on network
File descriptor in bad state
Remote address changed
Can not access a needed shared library
Accessing a corrupted shared library
.lib section in a.out corrupted
Attempting to link in too many shared libraries
Cannot exec a shared library directly
Invalid or incomplete multibyte or wide character
Interrupted system call should be restarted
Streams pipe error
Too many users
Socket operation on non-socket
Destination address required
Message too long
Protocol wrong type for socket
Protocol not available
Protocol not supported
Socket type not supported
Operation not supported
Protocol family not supported
Address family not supported by protocol
Address already in use
Cannot assign requested address
Network is down
Network is unreachable
Network dropped connection on reset
Software caused connection abort
Connection reset by peer
No buffer space available
Transport endpoint is already connected
Transport endpoint is not connected
Cannot send after transport endpoint shutdown
Too many references: cannot splice
Connection timed out
Connection refused
Host is down
No route to host
Operation already in progress
Operation now in progress
Stale NFS file handle
Structure needs cleaning
Not a XENIX named type file
No XENIX semaphores available
Is a named type file
Remote I/O error
Disk quota exceeded
No medium found
Wrong medium type
infinity
/bin/sh
/dev/tty
POSIXLY_CORRECT
%s: option `%s' is ambiguous
%s: option `--%s' doesn't allow an argument
%s: option `%c%s' doesn't allow an argument
%s: option `%s' requires an argument
%s: unrecognized option `--%s'
%s: unrecognized option `%c%s'
%s: illegal option -- %c
%s: option requires an argument -- %c
:/bin:/usr/bin
/bin/sh
PATH
/etc/passwd
+0-#'I
npxXoudifFeEgGaACScs
hlLjztqZ
/etc/resolv.conf
/etc/config/resolv.conf
nameserver
domain
search
/etc/networks
clntudp_create: out of memory
|bad auth_len gid %d str %d auth %d
xdr_bytes: out of memory
xdr_string: out of memory
/etc/hosts
/etc/config/hosts
__get_myaddress: socket
__get_myaddress: ioctl (get interface configuration)
__get_myaddress: ioctl
Cannot register service
xdr_array: out of memory
%s:
; errno = %s
; low version = %lu, high version = %lu
; why =
(unknown authentication error - %d)
; s1 = %lu, s2 = %lu
RPC: Success
RPC: Can't encode arguments
RPC: Can't decode result
RPC: Unable to send
RPC: Unable to receive
RPC: Timed out
RPC: Incompatible versions of RPC
RPC: Authentication error
RPC: Program unavailable
RPC: Program/version mismatch
RPC: Procedure unavailable
RPC: Server can't decode arguments
RPC: Remote system error
RPC: Unknown host
RPC: Unknown protocol
RPC: Port mapper failure
RPC: Program not registered
RPC: Failed (unspecified error)
RPC: (unknown error code)
Authentication OK
Invalid client credential
Server rejected credential
Invalid client verifier
Server rejected verifier
Client credential too weak
Invalid server verifier
Failed (unspecified error)
n;^
Qkkbal
i]Wb
9a&g
MGiI
wn>Jj
#.zf
+o*7
subnet
timezone
router
timesvr
namesvr
logsvr
cookiesvr
lprsvr
! hostname
bootsize
domain
swapsvr
rootpath
ipttl
broadcast
ntpsrv
!*wins
!,requestip
2lease
3dhcptype
5serverid
6message
8tftp
Bbootfile
CAk[S
