BWFWTools 0.1.1

From OpenWiz

BWFWTools 0.1.1

Version 0.1.1

Download BWFWTools 0.1.1

Warning

WARNING

Using user extensions or hacks may make your Beyonwiz unable to operate correctly, or even start. Some modifications are known to interfere with the correct functioning of the Beyonwiz.

If your Beyonwiz cannot start after you load modified firmware, you may need to use the procedures in the NOTICE - How to recover from FW update failure procedure on the Beyonwiz forum. It's not known whether that procedure will fix all failures due to user modifications or "hacks".

If you run modified firmware on your Beyonwiz, and have problems with its operation, try to reproduce any problems you do have on a Beyonwiz running unmodified firmware, or at least mention the modifications you use when reporting the problem to Beyonwiz support or on the Beyonwiz Forum. Beyonwiz support may not be able to assist if you are running anything other than unmodified firmware from Beyonwiz. Forum contributors may be able to be more flexible, but they will need to know what modifications you have made.

Release notes

New in 0.1.1

Fixed in 0.1.1

bw_rootfs

Zero-pad extracted file to next 1024-byte boundary for compatibility with genromfs output and loopback mounting on systems that support it. function for size roundup

BWFW

Fixed magic numbers of _end at 0x90092104, previously referred to the wrong location

make_doc.sh

Use a Perl one-liner instead of unix2dos to change <LF> to <CR><LF>. No unix2dos on Mac OS X.

Bugs in 0.1.1